INFOTIME Fingerprint Door Access is a biometric reader with compact and unique in design with high quality optical sensor.
The optical sensor effectively detects cut, swelled, too dry & wet fingers with high speed conversion and classification.
Different types of time zone setting like some staff’s can access the door 24 x 7 and some staff’s can access only during 9am – 6pm,etc… can be set. Door force open & force close can be triggered to the alarm for security purpose.
It has built-in Proximity card Reader as well. If an particular employee’s all the finger has problem / damaged, then that employee can use either proximity card or PIN number to access the door & attendance purpose.
This biometric reader has built-in controller which can connect to the door EM lock (Electro Magnetic Lock). Once the employee finger verified it sends the signal to the EM Lock to open the door.
It takes about one second to verify the employee’s finger and the Date & time is stored into the device internal memory. This data can download to the access control software and the staff’s accessed timing can be viewed as report. This data’s can be linked to our Time Attendance Software via built-in Network card for lateness, Overtime calculation purpose.
It can be used as a standalone door access or can be link to a access control software to set different access timing for different group of employees.
Up to 3 fingers per employee can be registered and the employee can use any one finger to get access to the door.
|Verification Mode||1:1 1:N|
|False Acceptance Rate (FAR)||<=0.0001%|
|False Rejection Rate (FRR)||0.01%|
|Operating Humidity||20% – 80%|
|Size||120 x 105 x 30mm|
|Cable||Built-in Ethernet card for durable connection|